PE145 | PVCu Corner Bead with 145g/m² ETAG Mesh

Protects and reinforces the corners of the insulation boards. The profile to create exact edges in thermal insulation systems. The mesh to ensure that there are no cracks in the render.

Applications

ETICS:     External Thermal Insulation Composite System

EIFS:        External Insulation and Facade System

EWI:        External Wall Insulation

Materials

• Extruded with impact-resistant,%0 recycled content, high-quality rigid PVC, and reinforcement alkali-resistant glass fibre mesh.
• ETAG 004 certified 145 g/m² reinforcement alkali-resistant E-glass fibre mesh.
• Strong adhesion of bead and glass fibre mesh with transparent hot-melt glue.

Installation

• Should be pushed into the first base coat layer.
• Cut using a fine-toothed hacksaw across bead noses.

Notice !

Make sure that you choose the most suitable profile material and plaster mortar according to the application area to avoid excessive risks, claims, and consequential damage. To prevent bimetallic corrosion, ensure that all metal components used in a given installation are of the same material type. Please ensure sufficient aeration to prevent corrosion and accelerate the drying time. Avoid damage to beads when trowelling plaster or render. Care should also be taken to prevent mechanical damage to the galvanised coating. The substrate must be dry, clean, dust-free, absorbent, and load-bearing in accordance with the requirements of the plaster coats to be applied. The wall surface must not contain salts or foreign substances and efflorescence must be removed. In general, metal beads should be kept dry and stored flat.