P1000 | PVCu Corner Bead

P1000 provides true and sharp interior - exterior plastered corners. Its strong rigid arris protects and reinforces plaster against impact.

Applications

• Precise solution for interior areas exposed to high moisture and dampness after
  application. (houses in wooded areas, wet rooms, swimming pools, and domestic bathrooms, etc.)
• Suitable for exposed coastal locations or corrosive environments.

Compatibility

• Suitable for external applications with appropriate cement-based renders.

Materials

• Extruded with impact-resistant, %0 recycled content, and high-quality rigid PVC. 
• Economical alternative to stainless steel for external applications.
• Superior corrosion resistance, unlike galvanized beads.
• Unsharp edges prevent injuries.
• Convenient, easy to cut lengths on site.
• Light and easy to transport.
• Resistant to breakage.

Installation

• Should be fixed with plaster in interior applications.
• Should be fixed with cement-based adhesive mortar dabs in exterior applications.
• Cut using a fine-toothed hacksaw across bead noses.

Notice !

Make sure that you choose the most suitable profile material and plaster mortar according to the application area to avoid excessive risks, claims, and consequential damage. To prevent bimetallic corrosion, ensure that all metal components used in a given installation are of the same material type. Please ensure sufficient aeration to prevent corrosion and accelerate the drying time. Avoid damage to beads when trowelling plaster or render. Care should also be taken to prevent mechanical damage to the galvanised coating. The substrate must be dry, clean, dust-free, absorbent,t and load-bearing according to the requirements of the plaster coats to be applied. The wall surface must not contain salts or foreign substances and efflorescence must be removed. In general, metal beads should be kept dry and stored flat.