G1081 | Galvanised Steel Corner Bead with PVC nose

Provides true and straight arris. Prevents chipping and cracking to vulnerable corners. Perforated wings to prevent cracking. PVCu extruded nosing to protect the edge/arris of the bead during application. Do not plaster over the PVC nose!

Applications

• Exterior rendering, sand-cement plastering, and in conditions with high moisture and dampness. (houses in wooded areas, bathrooms, etc.)
• Not suitable for exposed coastal locations or corrosive environments.

Compatibility

• Suitable for lime or cement-based renders, scratch renders, pasty finishing coats.

Materials

• Manufactured with DX51D+Z galvanised steel strips with zinc coating of 275 g/m² on both sides in accordance with EN 10346 and protective PVCu nose. PVC nose adds protection and a maintenance-free finish.

Installation

• Should be mechanically fixed with stainless clout nails or with cement-based mortar, no plaster.
• PVC nose must not be plastered over and must be cleaned off immediately after plastering.
• Take off nails eventually used for fixing of the profiles before plastering.
• Cut with hand plate shears across the wings and a fine-toothed saw across bead noses.

Notice !

Make sure that you choose the most suitable profile material and plaster mortar according to the application area to avoid excessive risks, claims, and consequential damage. To prevent bimetallic corrosion, ensure that all metal components used in a given installation are of the same material type. Please ensure sufficient aeration to prevent corrosion and accelerate the drying time. Avoid damage to beads when trowelling plaster or render. Care should also be taken to prevent mechanical damage to the galvanised coating. The substrate must be dry, clean, dust-free, absorbent, and load-bearing in accordance with the requirements of the plaster coats to be applied. The wall surface must not contain salts or foreign substances and efflorescence must be removed. In general, metal beads should be kept dry and stored flat.